iPhone insurance chit chat: iOS 5 to feature full HD video support

Another group of speculators have still the iOS 5 together with the iPhone 5 be predicted. As rumors wildly about how exactly gone and what 5 of next generation for the iPhone feature is iOS, there are already some ideas has what in the iOS on us, to anticipate 5. There are a number of 200 additional features, but with only 10 major features as Imessage\r notification system, revised PC free and so on. at the 2011 WWDC keynote address due to the limited available time. Some of the hidden attributes are gradually to the general public is revealed.

The final revelation of 9 is 5 Mac iOS 5 support for full 1080p HD video. As iOS, 4 supports only 720 p. (iOS 5 users will be rendered and exported 1080p video content with all Apple products A4 processor or higher Apple IOS, Apple iPad 2, 4 Apple iPhone and iPod touch 4). That each this speculation true could be proven to be a full HD video support such a large involvement will become the lineup functions that work with the iPhone5.

See your most liked Apple could videos in your iPhone as big as watching it on wide screen LED TVs. In the latest versions of the must see movies of Harry Potter and the Deathly of Hallows part 2 or the mighty Thor, you'd definitely want these movements in your iTunes collection for the image of stored repeat while dull moments of your daily life. As also Kung Fu Panda 2 will be each film viewing experience as always rate which is available also in 3D on the iPhone5 as a classic. You are charged with minor changes to their code to secure the 1080p video export settings programmers.

The 9-5 Mac speculated that 1080p video support in iOS 5, and that it is suggestive that iPhone5 get a fine 8-megapixel digital camera. iPhone5 working on iOS 5 is now just about the most awaited and definitely the preferred entities in the world of technology is in the near future. Both as own resources have a good is much defense as iPhone insurance being required. The Apple iPhone5 would have a brand new eye-candy for celebrities, device freaks and thieves, as well as. To purchase a beautiful and compact phone, there are no other better way to get it as the accidental and water damage. Add cover the loss or theft, your users need for much greater protection. The iPhone insurance could keep covered not only, but also outside of the United Kingdom. The highest is you can believe it on your Apple iPhone, or not be obtained.

More about → iPhone insurance chit chat: iOS 5 to feature full HD video support

Blade servers for green technology

Environmentalists around the world are now in a panic due to the technology, which in turn has created a lot of anger and dismay of our environment. For example, the cars, which are a rising technology will give the result of carbon monoxide, which may be damaging our lungs and are able, pollute our air. Another example of this pollution is the new gadgets are a trend that the radiation - increases and thus one of the factors why our planet is warming. Due to such problems and conditions create man's intellect has new things was not finally impeded. In fact, there are very many technological companies today, that location, solutions to help the Earth a cleaner and more environmentally friendly place without to oppose or hinder new products which are well advanced, to help us to find quick and easy to make our work have been.

One of the best examples of such a product is the blade server. This gadget is an uncovered computer server with an integrated design that is marked, save the amount of space that it needs as the energy, the to the generate. He has to popular recently because of its special attributes that help to save energy; and be less extensive due to the reduced size is designed. It consists of thin electronic units in a lonely or single framework. These thin electronic units are absolute server referred to blades. The main use of this server depends on the purpose, that the host would like to. Such servers can be used only for a single purpose. For example, a Web hosting server will use the blades for Web hosting only, while the blade can use file server for file-hosting.

It is recommended by environmentalists is that it be made in order to reduce global warming. Its special feature is that it is equipped with a common high speed bus, which means that the cables that are used less, so that it will release less heat or temperature. Such a gadget can help, Web-hosting-work better and faster – less of harmful heat and radiation, that it can spend. Therefore, it is definitely an amazing work of technology; and you must be concerned not about the harmful effects, which in turn reduces the rising heat temperature in our environment.

More about → Blade servers for green technology

How to limit emails sent per hour

Note: To use this option you must MailBoy 2004 build 1067 or later.

As many of you should know already, several ISPs limit the number of e-mails can be send through their SMTP servers. To adapt to the requirements of ISPs and still be able to send your newsletters without paying much attention to the program, you will need to be able to put the program to send a limited number of emails per hour. In this way the program runs smoothly without risk to be blocked for breach of the limit.

To help our customers dealing with this problem, we have implemented a new feature in MailBoy. This is the option limit per hour on the program Options dialog box.

To enable this option, you must check the box where it says "do set no more than" and to set the number of emails that can be send 1 hour.

For example, if your ISP has a limit of 200 emails that can be send 1 hour, then you must set the "do set no more than" 200 option. And please, don't forget to enable the option by checking it.

It is recommended that you set the limit value a little less than necessary, because it is not 100% accurate, unless you use 1 thread and low timeout. Thus, if your limit is 400 emails per hour, set 380, for example.

PARAMETER OF THE RECOMMENDED THREAD COUNT:

If you use an external SMTP server as a method of delivery, please ensure that your number of Threads is set to 1-2! This is to ensure that the SMTP server will not be overloaded and begin to reject the connection to your computer.

If you have problems using this option, do not hesitate to post here in the forum or contact our support.

More about → How to limit emails sent per hour

How to create updated e-mail messages format using MS Word

Here are a few steps how to create a text formatted with hypertext links in MS Word and send it with MailBoy 2004.

First of all, start MS Word and type your message text and format that you want. You can include hyperlinks if you want.

Note that you must not include images as they will not appear in the message, because the implementation specific html code in form as he produced MS Word. If you want images in your message, you must add them as described in this article.

After the message is ready and formatted, save it as a web page using the file menu:

Now in 2004 of MailBoy on the use of the "load" button located below the message box and browse the file that you saved in MS Word as an html page.

Don't FORGET to check the "send as HTML e-mail" OPTION in the message box before sending:

I hope that this will help. If you have more questions, feel free to contact us.

More about → How to create updated e-mail messages format using MS Word

MailBoy 2004 News Journal

Build 1073 (September 25, 2007)

• Unsubscribers list bug fixed.
• A few more little added corrections.

Build 1072 (November 4, 2006)

• Adds a new improved dialog to display the send details results and simplifies obtaining support if a problem sending occurs.
• A bug related to the list of UNSUBSCRIBERS is now fixed.

Build 1070 (September 25, 2006)

• Possibility to use the e-mail and name % in the body of the message, which will be replaced by the current recipient email address and the name of the mailbox (the string before @ in the email address).
• Now the option limit messages sent per hour is customizable and works for a fixed time interval (1 hour), but also for any interval of time given in a few minutes.
• Added a new option to specify the domain name "HELO".
• Some bugs fixed.

Build 1067 (February 8, 2006)

• Ability to set the limit of emails sent per hour added. More Info!
• Ability to set the number of attempts that the program tries to auto-renvoyer email addresses failed. More Info!
• Message from the preview before you submit functionality.

Build 1064 (June 1, 2005)

• The news of this version is optimized integrated SMTP server. Now, the program sends much faster and not stick after a thousand emails sent some as it has done sometimes on some systems.

Build 1062 (April 18, 2005)

• Released the final version of the external SMTP server functionality.
• A minor bug when choose to use external SMTP server is now set.
• Some additional info added to the Save dialog box.

Build 1060 (08 March 2005)

• Released new beta version of MailBoy 2004 Mass Mailer with additional capacity to use an external SMTP server. To learn more about this new feature, please click here!

Build 1057 (January 13, 2005)

• The bug causes the error "no file name contains a path not valid." is now fixed.

Build 1043 (January 15, 2004)

• Added ability to import addresses from e-mail from WAB (Windows address book) (by the request of the user).

Build 1042 (November 25, 2003)

• Contextual menus for the body of the Message and the list of e-mail added (at the request of the user).

Build 1041 (November 19, 2003)

• Ability to specify the external DNS server added.

Build 1039 (October 28, 2003)

• Unsubscribers list feature added (by the request of the user).

Build 1038 (October 20, 2003)

• Save non-processed emails added feature (by the request of the user).

Build 1037 (07 October 2003)

• Add the sender account fixed bug.
• Status skin added.

Build 1034 (September 10, 2003)

• Return failure emails added feature (by the request of the user).

Build a 1000 (September 10, 2003)

• New version of the released integrated SMTP server.

More about → MailBoy 2004 News Journal

How to use an external SMTP server for sending email

Why is this necessary feature?

MailBoy is a SMTP server integrated for sending messages directly from your PC to the recipient's e-mail server (without using any ISP SMTP server). It is the faster, more preferable method for sending e-mail messages.

However, for the correct work of the program, you must have access to port 25.

If you are operating in a restrictive firewall, as do most major providers of Internet access users, then you cannot use integrated MailBoy SMTP for sending messages, due to the blocking of port 25.

Most free ISP such as Juno, WorldShare, EarthLink, NetZero and other blocks port 25 and will only allow you to send an e-mail with their mail servers. In this case, you will need to use the SMTP server of your Internet service provider to transmit your message.

This is why we implemented in MailBoy the ability to use an external SMTP server for sending messages.

How does it work?

First of all, MailBoy sends a message to the external SMTP server. This server is your email address in the outgoing message queue, the message is sent to the server of your correspondent. And only after that your correspondent can receive.

If the server is not overloaded, deliver a message takes just a few seconds. But it can also take more time.

When to use it?

If your sending failure messages you've tried everything which is described in this article,
and again, without success, send a message. It is likely that your ISP blocks port 25, and you must use an external SMTP server to send messages.

The use of this feature?

You can set the use of an external SMTP server in the program Options dialog box:

1. Check the option "use external SMTP server to deliver messages.
2. "SMTP server" fill in the address of the SMTP server of your Internet service provider. If you do not know, please asko your ISP on this subject.
3. Set the "Port" 25, unless your ISP indicated some other port for the use of the SMTP server. In this case, complete the value required by your ISP.
4. If the external SMTP server requires authentication, and then check the option "this SMTP server requires authentication" and fill in your username in the field "login" and password into the field "Password".

This was it. You are now ready to send messages using an external SMTP server. If you want to switch back to using the Server SMTP integrated program, just uncheck the option "use the external SMTP server to deliver the messages" Options dialog box.

TIPS FOR USING AN EXTERNAL SMTP SERVER TO SEND MESSAGES

Define the optimal number of Threads

More ISPs not to send campaigns of email volume through their SMTP servers, because they were developed by sending limits. The limit could be the number of messages allowed to be send within an hour or a day, etc. Be sure so do not set a value for the number of Threads (in the Options dialog box). In this way you will also prevent oveloading of the SMTP server.

If your e-mail list is less than 1000 or a few thousand, the best is to define the number of Threads in the range of 1 to 5. Don't worry, the messages will be sent quickly, except if the SMTP server is currently occupied (or overloaded).

More about → How to use an external SMTP server for sending email

Increase your ROI return on investment

08/22/2003.
by Gerard Manning
http://searchengineposition.com/

An important aspect of search engine marketing should not forget to include is your ROI or return on investment in your marketing plan. To achieve top rankings for your Web site, you should always look at ways to increase your conversion rate. Are a few things to keep in mind, if people click on your link to your Web site, they will find the information they are looking for, and your site will be reliable enough for them to purchase a product or a service with their hard-earned money?

To increase your return on investment, you look at a few possible areas you need to improve your Web site or marketing plans. First, as mentioned above, the people to find your website take this next step to inform of your product or service? There could be many factors that need to be addressed. Perhaps some content revision is required, or a new conception of possible web or editing is necessary. Invest money to inspire the confidence of your potential customers will be profitable in the long term.

Another major obstacle affecting large sites of today is their content management systems. Choose the wrong CMS may leave your Web site invisible to the majority of search engines. There are systems content management friendly engine of research that are unique to your Web site and the url string title and meta description tags is not dynamic, and no user ID, so search engine spiders will not trapped in an endless loop reindex the same page with different url strings.

The next step is your return on investment calculation. In this article will help you determine what your site conversion might be. Conversions are the "action" events you want a visitor to open. It could be a form, to buy an item, you sending an email for more information or simply enter their name and email to communicate with more of your sales team. Once these events are defined, you can then calculate the conversion rate of your site.

To calculate the ROI, you will also have to determine what is your rate of closing leads web generated, and the average sales from a lead online. It is a little harder for some than others. If you are an online retail site, your sales reports should provide you with all the numbers you need. But if your site is intended only to capture leads so you can begin to build a relationship, it will be much more difficult to determine these figures.

Let's look at a case. An online Bank decided they want to attract potential new clients through their Web site. They have defined 3 conversion triggers:

1 Visitors entering their email and the preliminary contact information to download a PDF document outlining the benefits of banking online services and information on mortgages and consumer loans.

2. Visitors requesting a credit is the analysis of a representative of the Bank.

3. Visitors to join a list of the E-mail newsletter subscription.

Obviously, these visitors are not buy anything online, so there is no easy way to determine the average revenue generated by the lead closed. The Bank would look back at past numbers and try to determine what is the average value of a new client for them. Then, they'll determine the closing rate average for each of the three types of conversions. Initially, these rates can be reasoned conjecture, which can be refined once the program is ongoing and monitoring is in place.

Once in place, the numbers of conversion and ROI analysis can take place on the trafficking of Web site to the Web site of banks.

For most website owners, these calculations will be a new exercise. If you work with an online marketing consultant or a marketing company search engine, ask if they have the experience to help you gather these figures. If they have never contributed to a client with analysis King, ask why not. It's a potential red flag indicating that your marketing consultants may not be able to success as you.

As mentioned above, there are many other factors must be taken into account in addition to these high page rankings. Having the best rankings and a Web site that feels comfortable to buy from will not make your company, no good. Always keep in mind that must be changed to encourage people to take this next step with your site on enquiring about a product or service. And finally, you must set your goals for your desired conversions are for your Web site.

Depth to look in the calculation of return on your investment formula, please follow the link for Netprofit of Positions for the search engine on the calculation of your Maximum cost per visitor.

More about → Increase your ROI return on investment

ContentChecker - TEST before you send it

It is a good idea to check how your message stacks before sending it.

The lyris (http://www.lyris.com/contentchecker/) content checker tells you how your Spam Assassin rank ballot. All you do is copy your Bulletin text and paste it into the area on their site. They you run your free report and e-mail a copy to you. It usually happens a few minutes.

The report tell you exactly what words are costs you points. You only should ordinarily concerned if your score is more than 5 points. If so, you can delete these words or their disguise.

Other auditors of content you can designate are:

http://www.WordBiz.com/avoidspamfilters.html
http://SpamCheck.SiteSell.com

More about → ContentChecker - TEST before you send it

Guide to the sending of emails with MailBoy 2004 - step by step

I received a few requests on the drafting of a step by step guide to send emails with MailBoy. So, here it is:.

First, you must load the list of emails.

To load a list of e-mail, you will need to click on the button "Add" below "(mail list)" field:

After you have clicked on the button "Add", the called dialog "Add mail list" will appear.

Fill in the name of the list with whatever name you want (it is not important).

After that, click on the button "load Mail list" in the dialog box and your mail list:

The e-mail list will help you load must be in text with a single mail in

each line. If not, then use the "Import mail" instead of "Load Mail List" button
button. It retrieves all emails to the specified file, regardless of their position.

After the addition of the list of e-mail, you must choose which email you will send the message
Of. You can do this by selecting one of the accounts in the "FROM (account)" drop-down
menu:

If you do not have an account "of" added yet, you can do so by clicking on the

"add" bellow button field "(account)". A dialog box called "add account".
appear, fill it in and click on the button "Save":

Note that the info that you complete this dialog box will appear in the "Sender" field of the

the mailbox of the recipient:

You are now ready to write the message and send it:

Have just hit the Start button, and the program will begin to send the message to the

e-mails in the e-mail list that you created. You can view the status of the shipment
in the "Sending State" box in the program.

I hope that this guide will help. If you have more questions, feel free to contact us.

More about → Guide to the sending of emails with MailBoy 2004 - step by step

How to send HTML messages with images

If you want an HTML message with images included, you have only to are two things:

1. Download the image to your web hosting. If you do not have one, you can use one of the free thousands of accommodation on the internet.

2. In the html code of your message, you need to replace the IMG tag, which looks like this:

< img src = "…." "alt ="Topic Picture"width ="120? height ="35? >

the "...". "with the URL of the image that is uploaded in your web hosting. For example, if your address is:

http://geocities.com/JohnSmith/

and the name of the image is

Picture1.gif

URL of your image will then be:

http://geocities.com/JohnSmith/picture1.gif

and the IMG tag will be:

"< img src="http://geocities.com/johnsmith/picture1.gif ">

just replace it with one generated from your favorite html, such as Word or Front Page Editor, and that's it.

This way to integrate images into your html message is preferred for most people, due to the economics of bandwidth. In this way you tie not the image directly to the message and the message gets smaller and will be sent several times faster.

More about → How to send HTML messages with images

How to set the program Auto-réessayer to send to the failure

Note: To use this option you must MailBoy 2004 build 1067 or later.

We have received several requests from customers to change the return email addresses failed, so it can be configured for a number of attempts to auto-retry sending.

This feature is now implemented in the program, and is available in the Options dialog box where it says "try return addresses of electronic mail has failed". After that, there is a field where you can type the number of attempts that the program will retry to send the email addresses failed.

Note: If the value of the attempts to retry is set to 0, the program will not seek to return after the initial mailing is completed.

If you have problems using this option, do not hesitate to post here in the forum or contact our support.

More about → How to set the program Auto-réessayer to send to the failure